Search Legislation

Advanced Search

Commission Delegated Regulation (EU) 2020/1749Show full title

Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items

Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Changes to legislation:

There are currently no known outstanding effects for the Commission Delegated Regulation (EU) 2020/1749. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

  1. Introductory Text

  2. Article 1.Council Regulation (EC) No 428/2009 is amended as follows: Annex...

  3. Article 2.This Regulation shall enter into force on the day following...

  4. Signature

    1. ANNEX I

      1. LIST OF DUAL-USE ITEMS (referred to in Article 3 of this Regulation)

        1. GENERAL NOTES TO ANNEX I

          1. 1. For control of goods which are designed or modified for...

          2. 2. The object of the controls contained in this Annex should...

            1. NB: In judging whether the controlled component or components are to...

          3. 3. Goods specified in this Annex include both new and used...

          4. 4. In some instances chemicals are listed by name and CAS...

        2. NUCLEAR TECHNOLOGY NOTE (NTN)

        3. GENERAL TECHNOLOGY NOTE (GTN)

          1. Note: This does not release such "technology" specified in 1E002.e., 1E002.f.,...

        4. NUCLEAR SOFTWARE NOTE (NSN)

          1. Note: The Nuclear Software Note does not release "software" specified in...

        5. GENERAL SOFTWARE NOTE (GSN)

        6. GENERAL "INFORMATION SECURITY" NOTE (GISN)

        7. EDITORIAL PRACTICES IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION...

        8. ACRONYMS AND ABBREVIATIONS USED IN THIS ANNEX

        9. DEFINITIONS OF TERMS USED IN THIS ANNEX

          1. NB: Category references are given in brackets after the defined term....

          2. NB: See Category 4, Technical Note.

          3. NB: See also "civil aircraft".

          4. NB: Additional and alternative allocations are not included.

          5. NB: A common use of "asymmetric algorithms" is key management.

          6. N.B.1. "Basic gate propagation delay time" is not to be confused...

          7. N.B.2. ‘Family’ consists of all integrated circuits to which all of...

          8. NB: See also "aircraft".

          9. Technical Notes:

            1. 1. "Cryptographic activation" techniques and mechanisms may be implemented as hardware,...

            2. 2. Mechanisms for "cryptographic activation" can, for example, be serial number-based...

          10. Notes:

            1. 1. "Cryptography" does not include ‘fixed’ data compression or coding techniques....

            2. 2. "Cryptography" includes decryption.

          11. Technical Notes:

            1. 1. ‘Secret parameter’: a constant or key kept from the knowledge...

            2. 2. ‘Fixed’: the coding or compression algorithm cannot accept externally supplied...

          12. NB: Modifications of a stored sequence of instructions include replacement of...

          13. NB: See also "total digital transfer rate".

          14. N.B.1. ‘Circuit element’: a single active or passive functional part of...

          15. N.B.2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own...

          16. NB: ‘Active tooling unit’ means a device for applying motive power,...

          17. NB: ‘Circuit element’ is a single active or passive functional part...

          18. NB: This is not intended to include a stack of single...

          19. N.B.1. ‘Circuit element’: a single active or passive functional part of...

          20. N.B.2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own...

          21. Technical Note:

          22. NB: See also "magnetic gradiometer".

          23. Notes:

            1. 1. "Intrusion software" does not include any of the following:

            2. 2. Network-capable devices include mobile devices and smart meters.

          24. Technical Notes:

            1. 1. ‘Monitoring tools’: "software" or hardware devices, that monitor system behaviours...

            2. 2. ‘Protective countermeasures’: techniques designed to ensure the safe execution of...

          25. NB: See also "Chemical laser"; "CW laser"; "Pulsed laser"; "Super High...

          26. NB: ‘Data device’ means equipment capable of transmitting or receiving sequences...

          27. NB: See also "intrinsic magnetic gradiometer".

          28. NB: The internal storage may be augmented by an external storage....

          29. N.B.1. The "microprocessor microcircuit" normally does not contain integral user-accessible storage,...

          30. N.B.2. This includes chip sets which are designed to operate together...

          31. NB: ‘Circuit element’ is a single active or passive functional part...

          32. Note: "OAM" does not include any of the following tasks or...

          33. Technical Notes:

            1. 1. ‘Data device’ means equipment capable of transmitting or receiving sequences...

            2. 2. The "local area network" extends beyond the geographical area of...

          34. Technical Note:

          35. Technical Note:

          36. NB: The above definition does not include the following devices:

          37. NB: ‘Strand’ is a bundle of "monofilaments" (typically over 200) arranged...

          38. NB: ‘Microprogram’ means a sequence of elementary instructions, maintained in a...

          39. NB: A determination that a specific item is "Space-qualified" by virtue...

          40. N.B.1. ‘Discrete component’: a separately packaged ‘circuit element’ with its own...

          41. N.B.2. ‘Circuit element’: a single active or passive functional part of...

          42. NB: The "superconductive" state of a material is individually characterised by...

          43. NB: A common use of "symmetric algorithms" is confidentiality of data....

          44. NB: ‘Strand’ is a bundle of "monofilaments" (typically over 200) arranged...

          45. N.B.1. ‘Technical assistance’ may take forms such as instructions, skills, training,...

          46. N.B.2. ‘Technical data’ may take forms such as blueprints, plans, diagrams,...

          47. NB: See also "digital transfer rate".

          48. NB: ‘Strand’ is a bundle of "monofilaments" (typically over 200) arranged...

      2. CATEGORY 0 – NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT

        1. Systems, Equipment and Components

        2. Test, Inspection and Production Equipment

          1. Technical Note:

          2. Note: 0B006 includes:

        3. Materials

          1. Note: 0C001 does not control the following:

          2. Note: 0C002 does not control four "effective grammes" or less when...

          3. NB: SEE ALSO 1C107.

          4. Note 1: For the purpose of export control, the competent authorities of...

          5. Note 2: In 0C004, ‘boron equivalent’ (BE) is defined as the sum...

        4. Software

        5. Technology

      3. CATEGORY 1 – SPECIAL MATERIALS AND RELATED EQUIPMENT

        1. Systems, Equipment and Components

          1. NB: SEE ALSO 1A202, 9A010 and 9A110.

          2. Note 1: 1A002 does not control "composite" structures or laminates made from...

          3. Note 2: 1A002 does not control semi-finished items, specially designed for purely...

          4. Note 3: 1A002.b.1. does not control semi-finished items containing a maximum of...

          5. Note 4: 1A002 does not control finished items specially designed for a...

          6. Note 5: 1A002.b.1. does not control mechanically chopped, milled, or cut carbon...

          7. Note: 1A003 does not control manufactures when coated or laminated with...

          8. NB: For "fusible" aromatic polyimides in any form, see 1C008.a.3.

          9. NB: SEE ALSO MILITARY GOODS CONTROLS, 2B351 AND 2B352.

          10. Technical Notes:

            1. 1. 1A004 includes equipment and components that have been identified, successfully...

            2. 2. ‘Simulant’ is a substance or material that is used in...

            3. 3. For the purposes of 1A004, ‘radioactive materials’ are those selected...

          11. NB: SEE ALSO MILITARY GOODS CONTROLS.

          12. NB: For "fibrous or filamentary materials" used in the manufacture of...

          13. Note 1: 1A005 does not control body armour when accompanying its user...

          14. Note 2: 1A005 does not control body armour designed to provide frontal...

          15. Note 3: 1A005 does not control body armour designed to provide protection...

          16. NB: SEE ALSO MILITARY GOODS CONTROLS.

          17. Technical Note:

          18. Note: 1A006 does not control equipment when accompanying its operator.

          19. NB: SEE ALSO MILITARY GOODS CONTROLS, 3A229 AND 3A232.

          20. Technical Notes:

            1. 1. The word initiator or igniter is sometimes used in place...

            2. 2. For the purpose of 1A007.b. the detonators of concern all...

          21. Technical Note:

          22. NB: SEE ALSO 9A010 AND 9A110.

          23. Technical Note:

        2. Test, Inspection and Production Equipment

          1. NB: SEE ALSO 1B101 AND 1B201.

          2. Technical Notes:

            1. 1. For the purpose of 1B001, ‘primary servo positioning’ axes control,...

            2. 2. For the purposes of 1B001, a ‘filament band’ is a...

          3. NB: SEE ALSO 1B102.

          4. NB: SEE ALSO 1B201.

          5. Note: Components and accessories specified in 1B101 include moulds, mandrels, dies,...

          6. NB: SEE ALSO 1B115.b.

          7. Note: 1B102 includes:

          8. Note 1: For equipment specially designed for the production of military goods,...

          9. Note 2: 1B115 does not control equipment for the "production", handling and...

          10. Note: In 1B117.d. the term ‘mixing/kneading shaft’ does not refer to...

          11. Note: 1B226 includes separators:

          12. Technical Note:

          13. NB: SEE ALSO MILITARY GOODS CONTROLS.

          14. Technical Note:

        3. Materials

          1. Technical Note:

          2. NB: SEE ALSO 1C101.

          3. NB: SEE ALSO 1C202.

          4. Note: 1C002 does not control metal alloys, metal alloy powder and...

          5. Technical Notes:

            1. 1. The metal alloys in 1C002 are those containing a higher...

            2. 2. ‘Stress-rupture life’ should be measured in accordance with ASTM standard...

            3. 3. ‘Low cycle fatigue life’ should be measured in accordance with...

          6. Technical Note:

          7. NB: SEE ALSO 1C107.

          8. Technical Notes:

            1. 1. The ‘glass transition temperature (Tg)’ for 1C008.a.2. thermoplastic materials, 1C008.a.4....

            2. 2. The ‘glass transition temperature (Tg)’ for 1C008.a.2. thermosetting materials and...

          9. NB: SEE ALSO 1C210 AND 9C110.

          10. Technical Notes:

            1. 1. For the purpose of calculating "specific tensile strength", "specific modulus"...

            2. 2. Assessing the "specific tensile strength", "specific modulus" or specific weight...

          11. NB: SEE ALSO MILITARY GOODS CONTROLS and 1C111.

          12. NB: See also Military Goods Controls for metal powders mixed with...

          13. Technical Note:

          14. Note 1: 1C101 includes:

          15. Note 2: 1C101 does not include coatings when specially used for the...

          16. Technical Note:

          17. Note: For propellants and constituent chemicals for propellants not specified in...

          18. NB: SEE ALSO 1C216.

          19. Technical Note 1:

          20. Technical Note 2:

          21. Technical Note:

          22. Technical Note:

          23. Note: In 1C210, ‘fibrous or filamentary materials’ is restricted to continuous...

          24. Note: 1C216 does not control forms in which all linear dimensions...

          25. Technical Note:

          26. Note: In 1C225 mixtures containing boron include boron loaded materials.

          27. Technical Note:

          28. Note: 1C226 does not control manufactures specially designed as weights or...

          29. NB: SEE ALSO MILITARY GOODS CONTROLS.

          30. Note: 1C230 does not control the following:

          31. Note: 1C232 does not control a product or device containing less...

          32. Note: 1C233 does not control thermoluminescent dosimeters.

          33. Technical Note:

          34. Note: 1C234 does not control zirconium in the form of foil...

          35. Note: 1C235 does not control a product or device containing less...

          36. Note: 1C236 does not control a product or device containing less...

          37. Technical Note:

          38. Note: 1C237 does not control the following:

          39. Note: 1C240 does not control the following:

          40. Technical Note:

          41. NB: SEE ALSO MILITARY GOODS CONTROLS AND 1C450.

          42. Note 1: For exports to "States not Party to the Chemical Weapons...

          43. Note 2: For exports to "States Party to the Chemical Weapons Convention",...

          44. Note 3: 1C350 does not control "chemical mixtures" containing one or more...

          45. Note 4: 1C350 does not control products identified as consumer goods packaged...

          46. Note: 1C351 does not control "vaccines" or "immunotoxins".

          47. Technical Notes:

            1. 1. ‘Genetically-modified organisms’ include organisms in which the nucleic acid sequences...

            2. 2. ‘Genetic elements’ include, inter alia, chromosomes, genomes, plasmids, transposons, vectors...

            3. 3. ‘Endow or enhance pathogenicity’ is defined as when the insertion...

          48. Note 1: 1C353 does not control nucleic acid sequences of shiga toxin...

          49. Note 2: 1C353 does not control "vaccines".

          50. NB: SEE ALSO ENTRY 1C350, 1C351.d. AND MILITARY GOODS CONTROLS.

          51. Note 1: For exports to "States not Party to the Chemical Weapons...

          52. Note 2: For exports to "States Party to the Chemical Weapons Convention",...

          53. Note 3: 1C450 does not control "chemical mixtures" containing one or more...

          54. Note 4: 1C450 does not control products identified as consumer goods packaged...

        4. Software

        5. Technology

          1. Note: 1E104 includes "technology" for the composition of precursor gases, flow-rates...

      4. CATEGORY 2 – MATERIALS PROCESSING

        1. Systems, Equipment and Components

          1. NB: For quiet running bearings, see the Military Goods Controls.

          2. NB: SEE ALSO 2A101.

          3. Technical Note:

        2. Test, Inspection and Production Equipment

          1. Technical Notes:

            1. 1. Secondary parallel contouring axes, (e.g., the w-axis on horizontal boring...

            2. 2. For the purposes of 2B, the number of axes which...

            3. 3. Axis nomenclature shall be in accordance with International Standard ISO...

            4. 4. For the purposes of 2B001 to 2B009 a "tilting spindle"...

            5. 5. ‘Stated “unidirectional positioning repeatability” ’ may be used for each machine...

            6. 6. For the purposes of 2B001.a. to 2B001.c., measurement uncertainty for...

            7. 7. For the purpose of 2B001.a. to 2B001.c., the measurement of...

          2. NB: SEE ALSO 2B201.

          3. Note 1: 2B001 does not control special purpose machine tools limited to...

          4. Note 2: 2B001 does not control special purpose machine tools limited to...

          5. Note 3: A machine tool having at least two of the three...

          6. Note 4: A machine tool having an additive manufacturing capability in addition...

          7. NB: For optical finishing machines, see 2B002.

          8. Technical Notes: For the purposes of 2B002: 1. ‘MRF’ is a material...

            1. 1. ‘MRF’ is a material removal process using an abrasive magnetic...

            2. 2. ‘ERF’ is a removal process using an abrasive fluid whose...

            3. 3. ‘Energetic particle beam finishing’ uses Reactive Atom Plasmas (RAP) or...

            4. 4. ‘Inflatable membrane tool finishing’ is a process that uses a...

            5. 5. ‘Fluid jet finishing’ makes use of a fluid stream for...

          9. NB: SEE ALSO 2B104 and 2B204.

          10. Technical Note:

          11. NB: For specially designed dies, moulds and tooling see 1B003, 9B009...

          12. Note: 2B005 does not control chemical vapour deposition, cathodic arc, sputter...

          13. NB: SEE ALSO 2B207.

          14. NB: SEE ALSO 2B109 AND 2B209.

          15. Technical Note:

          16. NB: SEE ALSO 2B204.

          17. NB: SEE ALSO 2B209.

          18. Technical Note:

          19. Technical Note:

          20. NB: SEE ALSO 2B219.

          21. Note 1: 2B120 does not control rotary tables designed or modified for...

          22. Note 2: Motion simulators or rate tables specified in 2B120 remain controlled...

          23. Note: 2B121 does not control rotary tables designed or modified for...

          24. Note: Centrifuges specified in 2B122 remain controlled whether or not slip...

          25. Technical Note :

          26. Note 1: 2B201 does not control special purpose machine tools limited to...

          27. Note 2: A machine tool having at least two of the three...

          28. Note 3: 2B201.a.3. and 2B201.b.3. include machines based on a parallel linear...

          29. Technical Note:

          30. Note 1: Machine tools that can be used as measuring machines are...

          31. Note 2: A machine specified in 2B206 is controlled if it exceeds...

          32. Technical Notes:

          33. Note: 2B209.a. includes machines which have only a single roller designed...

          34. Technical Note:

          35. NB: SEE ALSO 3B001 and 9B001.

          36. Technical Notes:

            1. 1. In 2B230 ‘pressure transducer’ means a device that converts a...

            2. 2. For the purposes of 2B230, ‘accuracy’ includes non-linearity, hysteresis and...

          37. Technical Notes:

            1. 1. The pumping speed is determined at the measurement point with...

            2. 2. The ultimate vacuum is determined at the input of the...

          38. NB: SEE ALSO MILTARY GOODS CONTROLS.

          39. NB: SEE ALSO 2B350.i.

          40. Note: For the purposes of 2B350, the materials used for gaskets,...

          41. Technical Notes:

            1. 1. ‘Carbon graphite’ is a composition consisting of amorphous carbon and...

            2. 2. For the listed materials in the above entries, the term...

        3. Materials

        4. Software

          1. Note: 2D001 does not control part programming "software" that generates "numerical...

          2. Note 1: 2D002 does not control "software" specially designed or modified for...

          3. Note 2: 2D002 does not control "software" for items specified in 2B002....

          4. Note 3: 2D002 does not control "software" that is exported with, and...

          5. NB: SEE ALSO 9D004.

          6. Note: 2D202 does not control part programming "software" that generates "numerical...

        5. Technology

          1. Note: 2E001 includes "technology" for the integration of probe systems into...

          2. TABLE - DEPOSITION TECHNIQUES - NOTES

          3. TABLE - DEPOSITION TECHNIQUES - TECHNICAL NOTE

      5. CATEGORY 3 – ELECTRONICS

        1. Systems, Equipment and Components

          1. Note 1: The control status of equipment and components described in 3A001...

          2. Note 2: The control status of integrated circuits described in 3A001.a.3. to...

            1. NB: When the manufacturer or applicant cannot determine the control status...

          3. Note 3: The status of wafers (finished or unfinished), in which the...

          4. Technical Notes:

            1. 1. In 3A102 ‘thermal batteries’ are single use batteries that contain...

            2. 2. In 3A102 ‘missile’ means complete rocket systems and unmanned aerial...

          5. NB: 1. "Software" specially designed to enhance or release the performance of...

          6. NB: 2. "Technology" in the form of codes or keys to enhance...

          7. Note: 3A225 does not control frequency changers or generators if they...

          8. Technical Notes:

            1. 1. Frequency changers in 3A225 are also known as converters or...

            2. 2. Frequency changers in 3A225 may be marketed as Generators, Electronic...

          9. NB: SEE ALSO MILITARY GOODS CONTROLS.

          10. NB: SEE ALSO MILITARY GOODS CONTROLS.

          11. NB: See 1A007.b. for detonators.

          12. Technical Notes:

            1. 1. Electron bombardment mass spectrometers in 3A233.d. are also known as...

            2. 2. In 3A233.d.2., a ‘cold trap’ is a device that traps...

        2. Test, Inspection and Production Equipment

          1. NB: SEE ALSO 2B226

        3. Materials

          1. Note: 3C001.d. does not control a "substrate" having one or more...

          2. Note: 3C003 only controls compounds whose metallic, partly metallic or non-metallic...

          3. Note: 3C004 does not control hydrides containing 20 % molar or more...

        4. Software

          1. Technical Note:

        5. Technology

          1. Note 1: 3E001 does not control "technology" for equipment or components specified...

          2. Note 2: 3E001 does not control "technology" for integrated circuits specified in...

          3. Note 3: 3E001 does not control ‘Process Design Kits’ (‘PDKs’) unless they...

            1. Technical Note:

          4. Technical Notes:

            1. 1. For the purpose of 3E002.a. and 3E002.b., ‘floating-point’ is defined...

            2. 2. For the purpose of 3E002.c., ‘fixed-point’ refers to a fixed-width...

          5. Note 1: 3E002 does not control "technology" for multimedia extensions.

          6. Note 2: 3E002 does not control "technology" for micro-processor cores, having all...

          7. Note 3: 3E002 includes "technology" for the "development" or "production" of digital...

          8. Technical Note:

      6. CATEGORY 4 — COMPUTERS

        1. Note 1: Computers, related equipment and "software" performing telecommunications or "local area...

        2. Note 2: Control units which directly interconnect the buses or channels of...

          1. NB: For the control status of "software" specially designed for packet...

          2. Technical Note:

        3. Systems, Equipment and Components

          1. NB: SEE ALSO 4A101.

          2. Note 1: 4A003 includes the following:

          3. Note 2: The control status of the "digital computers" and related equipment...

          4. Technical Notes:

            1. 1. ‘Systolic array computers’ are computers where the flow and modification...

            2. 2. ‘Neural computers’ are computational devices designed or modified to mimic...

            3. 3. ‘Optical computers’ are computers designed or modified to use light...

          5. Note: This control only applies when the equipment is supplied with...

        4. Test, Inspection and Production Equipment

        5. Materials

        6. Software

          1. Note: The control status of "software" for equipment described in other...

          2. Note: 4D004 does not control "software" specially designed and limited to...

        7. Technology

        8. TECHNICAL NOTE ON "ADJUSTED PEAK PERFORMANCE" ("APP")

          1. Abbreviations used in this Technical Note

          2. Outline of "APP" calculation method

            1. 1. For each processor i, determine the peak number of 64-bit...

              1. Note: In determining FPO, include only 64-bit or larger floating point...

            2. 2. Calculate the floating point rate R for each processor Ri...

            3. 3. Calculate "APP" as "APP" = W1 × R1 + W2 × R2...

            4. 4. For ‘vector processors’, Wi = 0,9. For non-‘vector processors’, Wi = 0,3....

              1. Note 1: For processors that perform compound operations in a cycle, such...

              2. Note 2: For a pipelined processor the effective calculating rate R is...

              3. Note 3: The calculating rate R of each contributing processor is to...

              4. Note 4: Do not include processors that are limited to input/output and...

              5. Note 5: "APP" values are not to be calculated for processor combinations...

              6. Note 6: "APP" values must be calculated for processor combinations containing processors...

                1. Technical Notes:

                  1. 1. Aggregate all processors and accelerators operating simultaneously and located on...

                  2. 2. Processor combinations share memory when any processor is capable of...

              7. Note 7: A ‘vector processor’ is defined as a processor with built-in...

      7. CATEGORY 5 – TELECOMMUNICATIONS AND "INFORMATION SECURITY"

        1. Part 1 – TELECOMMUNICATIONS Note 1: The control status of components, test and "production"...

          1. Note 1: The control status of components, test and "production" equipment and...

            1. NB: For "lasers" specially designed for telecommunications equipment or systems, see...

          2. Note 2: "Digital computers", related equipment or "software", when essential for the...

          3. Systems, Equipment and Components

            1. Technical Note:

            2. Note: 5A101 does not control:

          4. Test, Inspection and Production Equipment

          5. Materials

          6. Software

          7. Technology

        2. Part 2 – "INFORMATION SECURITY" Note 1: Not used.

          1. Note 1: Not used.

          2. Note 2: Category 5 – Part 2 does not control products when...

          3. Note 3: Cryptography Note

            1. Note to the Cryptography Note:

              1. 1. To meet paragraph a. of Note 3, all of the...

              2. 2. In determining eligibility of paragraph a. of Note 3, competent...

          4. Systems, Equipment and Components

            1. NB: For the control of "satellite navigation system" receiving equipment containing...

          5. Test, Inspection and Production Equipment

          6. Materials

          7. Software

          8. Technology

            1. Note: 5E002 includes "information security" technical data resulting from procedures carried...

      8. CATEGORY 6 – SENSORS AND LASERS

        1. Systems, Equipment and Components

          1. NB: SEE ALSO 6A102.

          2. NB: SEE ALSO 6A203.

          3. NB: SEE ALSO 6A205.

          4. Note 1: Pulsed "lasers" include those that run in a continuous wave...

          5. Note 2: Excimer, semiconductor, chemical, CO, CO2, and ‘non-repetitive pulsed’ Nd:glass "lasers"...

            1. Technical Note:

          6. Note 3: 6A005 includes fibre "lasers".

          7. Note 4: The control status of "lasers" incorporating frequency conversion (i.e., wavelength...

          8. Note 5: 6A005 does not control "lasers" as follows:

          9. Note 6: For the purposes of 6A005.a. and 6A005.b., ‘single transverse mode’...

          10. Technical Note:

          11. NB: SEE ALSO 7A103.d.

          12. Note: 6A006 does not control instruments specially designed for fishery applications...

          13. Technical Note:

          14. NB: SEE ALSO 6A107.

          15. NB: SEE ALSO 6A108.

          16. Note: 6A008 does not control:

          17. Technical Note:

          18. N.B.1. "Software" specially designed to enhance or release the performance of...

          19. N.B.2. "Technology" in the form of codes or keys to enhance...

          20. Note: 6A203.a. to 6A203.c. does not control cameras or imaging devices...

          21. NB: For copper vapour lasers, see 6A005.b.

          22. Note: 6A225 includes velocity interferometers such as VISARs (Velocity Interferometer Systems...

        2. Test, Inspection and Production Equipment

          1. Note: 6B004 does not control microscopes.

          2. NB: SEE ALSO 6B108.

          3. Technical Note:

        3. Materials

        4. Software

          1. Technical Note:

        5. Technology

          1. Note: 6E101 only controls "technology" for items specified in 6A002, 6A007...

          2. Note 1: 6E201 only controls "technology" for cameras specified in 6A003 if...

          3. Note 2: 6E201 only controls "technology" for lasers in 6A005.b.6. that are...

      9. CATEGORY 7 – NAVIGATION AND AVIONICS

        1. Systems, Equipment and Components

          1. NB: For automatic pilots for underwater vehicles, see Category 8.

          2. NB: SEE ALSO 7A101.

          3. NB: For angular or rotational accelerometers, see 7A001.b.

          4. NB: SEE ALSO 7A102.

          5. NB: For angular or rotational accelerometers, see 7A001.b.

          6. NB: SEE ALSO 7A103.

          7. Note 1: ‘Inertial measurement equipment or systems’ incorporate accelerometers or gyroscopes to...

          8. Note 2: 7A003 does not control ‘inertial measurement equipment or systems’ which...

          9. Technical Note:

          10. NB: SEE ALSO 7A104.

          11. Technical Note:

          12. NB: SEE ALSO 7A105.

          13. NB: For equipment specially designed for military use, SEE MILITARY GOODS...

          14. NB: SEE ALSO 7A106.

          15. Note: 7A008 does not control systems specially designed for installation on...

          16. NB: See 6A001.a. for acoustic systems, and 6A001.b. for correlation-velocity and...

          17. Note: 7A101 does not control accelerometers specially designed and developed as...

          18. Technical Notes:

            1. 1. In 7A101 ‘missile’ means complete rocket systems and unmanned aerial...

            2. 2. In 7A101 the measurement of "bias" and "scale factor" refers...

          19. Technical Notes:

            1. 1. In 7A102 ‘missile’ means complete rocket systems and unmanned aerial...

            2. 2. In 7A102 ‘stability’ is defined as a measure of the...

          20. Technical Note:

          21. Technical Note:

          22. Note: Equipment specified in 7A105, 7A106, and 7A115 includes the following:...

          23. Note: For conversion of manned aircraft to operate as "missiles", 7A116...

          24. Technical Note:

        2. Test, Inspection and Production Equipment

          1. Note: 7B001 does not control test, calibration or alignment equipment for...

          2. Technical Notes:

            1. 1. ‘Maintenance Level I’

            2. 2. ‘Maintenance Level II’

          3. NB: SEE ALSO 7B102.

          4. Note: 7B003 includes:

        3. Materials

        4. Software

          1. Note: 7D002 does not control "source code" for the "use" of...

          2. Technical Note:

          3. Note: 7D004. does not control "source code" associated with common computer...

          4. Note: A common form of integration "software" employs Kalman filtering.

          5. Note: "Software" specified in 7D103 remains controlled when combined with specially...

          6. Note: 7D104 includes ‘software’, specially designed or modified to enhance the...

        5. Technology

          1. Note: 7E001 includes key management "technology" exclusively for equipment specified in...

          2. Note: 7E003 does not control "technology" for maintenance, directly associated with...

          3. NB: See Technical Notes to 7B001.

      10. CATEGORY 8 – MARINE

        1. Systems, Equipment and Components

          1. NB: For the control status of equipment for submersible vehicles, see:...

          2. Note: For underwater communications systems, see Category 5, Part 1 –...

        2. Test, Inspection and Production Equipment

        3. Materials

          1. NB: See also 8A002.a.4.

          2. Technical Note:

        4. Software

        5. Technology

      11. CATEGORY 9 – AEROSPACE AND PROPULSION

        1. Systems, Equipment and Components

          1. NB: For propulsion systems designed or rated against neutron or transient...

          2. NB: SEE ALSO 9A101.

          3. Note: The term ‘marine gas turbine engines’ includes those industrial, or...

          4. Technical Note:

          5. NB: SEE ALSO 9A104.

          6. NB: SEE ALSO 9A105 AND 9A119.

          7. NB: SEE ALSO 9A106, 9A108 AND 9A120.

          8. NB: SEE ALSO 9A107 AND 9A119.

          9. NB: SEE ALSO 9A108.

          10. NB: SEE ALSO 9A109 AND 9A119.

          11. NB: SEE ALSO 1A002 AND 9A110.

          12. NB: SEE ALSO 9A111 AND 9A118.

          13. Technical Note:

          14. NB: 1 SEE ALSO 9A112.

          15. NB: 2 For "UAVs" that are "sub-orbital craft", see 9A004.h.

          16. Note: 9A102 does not control civil certified engines.

          17. Technical Notes:

            1. 1. For the purposes of 9A102, a ‘turboprop engine system’ incorporates...

            2. 2. For the purposes of 9A102, the ‘maximum power’ is achieved...

          18. NB: SEE ALSO 9A004.

          19. NB: SEE ALSO 9A119.

          20. NB: SEE ALSO 9A119.

          21. NB: SEE ALSO 9A009 AND 9A119.

          22. NB: SEE ALSO 1A002.

          23. Technical Note:

          24. NB: SEE ALSO 9A011 AND 9A118.

          25. Technical Note:

          26. NB: SEE ALSO 9A121.

          27. Note: In 9A120 ‘other liquid or gel propellants’ includes, but is...

          28. Technical Note:

          29. Note: 9A350 does not control spraying or fogging systems and components...

          30. Technical Notes:

            1. 1. Droplet size for spray equipment or nozzles specially designed for...

            2. 2. In 9A350 ‘VMD’ means Volume Median Diameter and for water-based...

        2. Test, Inspection and Production Equipment

          1. NB: SEE ALSO 2B226

          2. NB: SEE ALSO 9B105.

          3. NB: SEE ALSO 9B106.

          4. Note: 9B009 does not control tooling for the production of powder....

          5. NB: SEE ALSO 9B005.

          6. Note: 9B105 does not control wind-tunnels for speeds of Mach 3...

          7. Technical Notes:

            1. 1. In 9B105 ‘aerodynamic test facilities’ includes wind tunnels and shock...

            2. 2. In Note to 9B105, ‘test cross section size’ means the...

            3. 3. In 9B105 ‘missile’ means complete rocket systems and unmanned aerial...

          8. Technical Notes:

            1. 1. ‘Aerothermodynamic test facilities’ include plasma arc jet facilities and plasma...

            2. 2. In 9B107 ‘missile’ means complete rocket systems and unmanned aerial...

          9. Technical Note:

        3. Materials

          1. NB: SEE ALSO 1C010 AND 1C210.

          2. Note: The only resin impregnated fibre prepregs specified in entry 9C110...

        4. Software

          1. NB: For "software" for items listed in 9A004.d. that are incorporated...

          2. Note: "Software" specified in 9D103 remains controlled when combined with specially...

          3. Note: 9D105 includes "software" specially designed for a manned "aircraft" converted...

          4. Technical Note:

        5. Technology

          1. Note: "Development" or "production""technology" specified in 9E001 to 9E003 for gas...

          2. NB: For "technology" for the repair of controlled structures, laminates or...

          3. Technical Note:

    2. ANNEX II

      1. ANNEX IIa UNION GENERAL EXPORT AUTHORISATION No EU001 (referred to...

    3. ANNEX III

      1. ANNEX IV (List referred to in Article 22(1) of this...

Back to top

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources